The Current Position:Home>>Products>>Brief Introduction

 

Hammer crusher

 

 
1.Introduction of hammer crusher
The series of hammer crushers breaks the materials by the collision the high-speed rotating hammer block and the colliding surface of the materials.
It is a kind of crusher which can break the materials with max particle size of 600-18000mm into the materials with 25mm or below 25mm.
 
2.Application of hammer crusher
Hammer crusher is mainly applied to low abrasion materials with medium hardness and compression strength not exceed 100Mpa. Such as coal, salt, chalk, gypsum,
bricks,  tiles, limestone, glass, etc. It is also used to crush wood chips with strong fiber structure and tenacity, and the waste from asbestos cement to recycle asbestos
fiber, etc. In addition, hammer crusher can be not only applied in crushing line and sand production line, but also applied instead of cone crusher.
 
3.Features of hammer crusher
Hammer crusher has the advantages of high product capacity, high crushing ratio, low power consumption, uniform products partial size, simple structure, compact and
light, low investment cost, easy to management, etc. The defects are: when crushing very hard materials, it will cause greater wear of hammer and grate and consume more
metal; it needs more maintenance time and uniform feeding of materials; when crushing soft-moist materials, the capacity will become significantly lower and even stop
because of material jam. In order to avoid jam, the moisture content of materials should be less than 10%-15%.
 
4.Technical parameters of hammer crusher

Type
Model
Feed size
(mm)
Discharge
Size(mm)
Capacity
(m3/h)
Motor
Weight(t)
Overall Size
( L*W×*H )(mm)
Number of Poles
Power(kw)
Hammer Crusher
PCΦ400×300
≤200
≤25
5-10
4
11
0.8
900×670×860
PCΦ600×400
≤250
≤30
10-22
4
22
1.5
1200×1050×1200
PCΦ800×600
≤250
≤25
18-40
4
55
3.8
1310×1180×1310
PCΦ1000×800
≤350
≤35
25-50
4
75
4.9
1600×1390×1575
PCΦ1000×1000
≤300
≤35
30-55
6
132
8
1800×1590×1775
PCΦ1250×1250
≤350
≤35
35-65
6
180
14
2060×1600×1890
PCΦ1400×1400
≤350
≤35
50-100
6
280
32
2365×1870×2220
PCΦ1600×1600
≤350
≤35
100-150
8
480
37.5
3050×2850×2800

 
 
Note: The technical parameters above are just for your reference. If there is any change, all parameters and overall dimension are subject to operating instructions. Any questions please feel free to contact us.

 

Call me!Jenny
Copyright © 2010GONGYI CITY SONGLING MINING MACHINERY CO.,LTD.
Tel: 0086- E-mail: MapXml
Call me!Jenny 免费幸运飞艇计划手机 pk10微信群或者飞艇群 全天幸运飞艇精准计划 北京幸运飞艇开奖直播 北京pk10幸运飞艇直播 幸运飞艇全天计划精准 助赢幸运飞艇软件 天天幸运飞艇计划软件 幸运飞艇 开奖b678点vip 幸运飞艇app主播 幸运飞艇【上恒达集团~HD161。COM~平台】 幸运飞艇【上恒达集团~HD161。COM~平台】 幸运飞艇【上恒达集团~HD161。COM~平台】 澳门百家乐【上恒达集团~HD161。COM~平台】 澳门百家乐【上恒达集团~HD161。COM~平台】 澳门百家乐【上恒达集团~HD161。COM~平台】 六合彩公司【上恒达集团~HD161。COM~平台】